26
There
are
no
parameters
for
the PATCH command.
When
the PATCH command
is
entered
and
executed, the following options
are
displayed:
ENTER OPTION NO.
1.
COPY
IMF TAPE
2.
LOAD IMFs
3.
DISP
EC
VER.
4.
KEY-ENTER IMF
5.
END
OF
JOB
6.
TAPE RECOVERY
7.
TAPE COpy
PGM
"S."
flashingJ
The display
shows
the options available
with
each
option identified by
an
option
number.
To initiate a selected option:
• Enter the option number.
•
Press
EXECUTE.
Entering
an
option number other than those displayed
causes
the options
to
be
redisplayed.
Once
you
have
entered
an
option number, additional prompts,
if
any,
are
displayed
for
the option selected.
Option 1 - Copy
IMF
Tape
The copy IMF tape option allows you
to
copy the following files from the
cartridge:
• File
1,
which contains:
- Copy IMFs program
Load IMFs program
- Display
EC
version program
• File 2, which contains IMFs
for
the 5100. IMFs
are
copied from file 2
as
follows:
Copy
alllMFs
that apply
to
BASIC
or
to
APL.
- Copy
alllMFs
that apply
to
the 5100 on which the copy
IMF
tape program
is
running.
Copy IMFs by problem number.
Copy IMFs by problem number that apply
to
the 5100
on
which the copy
IMF tape program
is
running.
,/
''"'---
To Next Page
Loading...
