IBM Aptiva Series Hardware Maintenance

Repair Information 4-23
Note: 1. When replacing the old riser card with a new one, make sure
that you remove the GND stitch from the old one and reinsert it
to the new one. Please refer to figure 4-18(encircle illustration)
on how to reinsert the GND stitch.
2. To reinstall the riser card, reverse the removal procedure.
Reconnect any adapter card cables that you disconnected when you
remove the adapter cards from the riser card.

IBM Aptiva Series Specifications

General

Expansion Slots	ISA, PCI
CPU	Intel Pentium
Operating System	Windows 95
Sound	Integrated Audio
Optical Drive	CD-ROM
Ports	Serial, Parallel, USB