IBM Aptiva Series - CD-ROM Emergency-Exit Option <1; CD-ROM Emergency-Exit Option <2

5-14
CD-ROM Emergency-exit Option <1>
Figure 5- 11 CD-ROM Front Panel with Emergency Hole View
If for any reason the tray does not eject automatically, insert and press an eject-
bar inside the emergency eject hole to manually eject the tray. A straightened
paper clip with a diameter of 1.2 mm (typical) can be used as an eject-bar.
Note: Make sure to turn off the power before manual disc eject operation.
CD-ROM Emergency-exit Option <2>
Locate the bottom edge of the disc tray. Gently pry the disk tray open with a
screwdriver. When the disc tray opens, simply remove the disc from the CD-
ROM drive.