Before installing the DS4800 in a rack cabinet, you must install the rails and
rack-mounting hardware that come with your storage subsystem. The DS4800
requires an Electronic Industries Association (EIA) 310-D Type A 19-inch rack
cabinet. The distance between EIA rails, from the front to the rear of the rack
cabinet, is 60.96 cm (24 in.) minimum and 81.28 cm (32 in.) maximum. This rack
cabinet conforms to the EIA standard. Where you place the support rails in the rack
cabinet depends on where you intend to position the storage subsystem.
ds48021
Figure 13. DS4800 rear rack mounting template
34 IBM System Storage DS4800 Storage Subsystem: Installation, Userās, and Maintenance Guide
To Next Page
Loading...
