IBM NeXtScale System User Manual

Chapter 3. IBM NeXtScale n1200 Enclosure 51
3.7.4 Web GUI interface
Through the FPC web interface, the user or system administrator can perform
the following tasks. For more information about the FPC web interface, see 7.2.1,
“FPC web browser interface” on page 180:
򐂰 View summary of elements status:
– Front and rear view of the chassis
– Compute nodes location and status
– FPC, power supplies, fan modules location, and status
򐂰 View current power usage:
– Voltage overview of the chassis
– Total chassis power consumption (AC-in)
– Total PSU power consumption (DC-out)
– Total fans power consumption
– Per-node power consumption
– Power supply fan speeds
򐂰 View and set power supply redundancy and oversubscription:
– Select N, N+1, or N+N mode
– Enable or disable oversubscription mode
򐂰 View and set power capping:
– Node level: Set value within a defined range for each node separately, or
choose between one of the three predefined modes.
– Chassis level: Set value within a defined range for the enclosure, or
choose between one of the three predefined modes.
򐂰 View and set power restore policy: Enable or disable (for each node or
chassis)
򐂰 View current fan speeds
򐂰 View and set Acoustic mode (three modes)
򐂰 View Chassis, Midplane, and FPC vital product data (VPD) details
򐂰 View, save, and clear the system event log
򐂰 View and set network configuration:
– SMTP configuration
– SNMP traps and email alert configuration
– Host name, DNS, Domain, IP, and IP version configuration
– SNMP traps email alert configuration
– Web server (http or https) ports configuration
򐂰 Perform a Virtual Reset or Virtual Reseat of each compute node

IBM NeXtScale System Specifications

General

Brand	IBM
Model	NeXtScale System
Category	Server
Language	English