IBM Power PS700 Problem Determination And Service Guide

Table 19. C2001000 to C20082FF checkpoints (continued)
v If the system hangs on a progress code, follow the suggested actions in the order in which they are listed in
the Action column until the problem is solved. If an action solves the problem, you can stop performing the
remaining actions.
v See Chapter 3, “Parts listing, Type 8406,” on page 229 to determine which components are CRUs and which
components are FRUs.
Progress code Description Action
C2008130 Begin associate of system ports
1. Go to “Recovering the system firmware” on
page 220.
2. Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 260.
C2008138 Associating system ports to the partition
1. Go to “Recovering the system firmware” on
page 220.
2. Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 260.
C200813F End associate of system ports
1. Go to “Recovering the system firmware” on
page 220.
2. Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 260.
C20081FF Processors started successfully, now
waiting to receive the continue
acknowledgement from system firmware
1. Go to “Recovering the system firmware” on
page 220.
2. Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 260.
C2008200 Continue acknowledgement received
from system firmware
1. Go to “Recovering the system firmware” on
page 220.
2. Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 260.
C20082FF VSP startup complete successfully
1. Go to “Recovering the system firmware” on
page 220.
2. Replace the system-board, as described in
“Replacing the FRU system-board and
chassis assembly” on page 260.
Chapter 2. Diagnostics 101

IBM Power PS700 Specifications

General

Brand	IBM
Model	Power PS700
Category	Server
Language	English