Table 25. 101-711 through FFC-725 SRNs (continued)
SRN FFC Description and Action
25C4-xxx 25C4 Generic reference for Broadcom adapter. Go to “Performing the checkout procedure”
on page 184.
25C4-201 25C4 Configuration error. Go to “Performing the checkout procedure” on page 184.
25C4-701 25C4 Permanent adapter failure. Go to “Performing the checkout procedure” on page 184.
25C4-601 25C4 Download firmware error. Go to “Performing the checkout procedure” on page 184.
25C4-602 25C4 EEPROM read error. Go to “Performing the checkout procedure” on page 184.
2604-xxx 2604 Generic reference for 4Gb Fibre Channel Adapter card. Go to “Performing the
checkout procedure” on page 184.
2604-102 2604 Reset Test failure for the Fibre Channel adapter card. Replace the 4Gb Fibre Channel
Adapter card.
2604-103 2604 Register Test failure for the Fibre Channel adapter card. Replace the 4Gb Fibre
Channel Adapter card.
2604-104 2604 SRAM Test failure for the Fibre Channel adapter card. Replace the 4Gb Fibre
Channel Adapter card.
2604-105 2604 Internal Wrap Test failure for the Fibre Channel adapter card. Replace the 4Gb Fibre
Channel Adapter card.
2604-106 2604 Gigabit Link Module (GLM) Wrap Test failure for the Fibre Channel adapter card.
Replace the 4Gb Fibre Channel Adapter card.
2604-108 2604 221 Enhanced Error Handling Failure on the bus for the Fibre Channel adapter card. Go
to “Performing the checkout procedure” on page 184.
2604-110 2604 Enhanced Error Handling Failure on the Fibre Channel adapter card. Replace the
4Gb Fibre Channel Adapter card.
2604-201 2604 221 Configuration Register Test Failure for the Fibre Channel adapter card. Go to
“Performing the checkout procedure” on page 184.
2604-203 2604 PCI Wrap Test Failure for the Fibre Channel adapter card. Replace the 4Gb Fibre
Channel Adapter card.
2604-204 2604 221 DMA Test Failure for the Fibre Channel adapter card. Go to “Performing the
checkout procedure” on page 184.
2604-205 2604 221 Error on Read/Write Operation for the Fibre Channel adapter card. Go to
“Performing the checkout procedure” on page 184.
2604-701 2604 Error Log Analysis indicates that the adapter self-test failed for the Fibre Channel
adapter card. Go to “Performing the checkout procedure” on page 184.
2604-703 2604 Error Log Analysis indicates that an unknown adapter error has occurred for the
Fibre Channel adapter card. Go to “Performing the checkout procedure” on page
184.
2604-704 2604 Error Log Analysis indicates that an adapter error has occurred for the Fibre Channel
adapter card. Go to “Performing the checkout procedure” on page 184.
2604-705 2604 Error Log Analysis indicates that a parity error has been detected for the Fibre
Channel adapter card.
The adapter must be replaced immediately. Failure to do so could result in data
being read or written incorrectly.
146 Power Systems: Problem Determination and Service Guide for the IBM Power PS700 (8406-70Y)
To Next Page
Loading...
