IBM Power PS700 Problem Determination And Service Guide

Table 15. B700xxxx Licensed internal code SRCs (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
v See Chapter 3, “Parts listing, Type 8406,” on page 229 to determine which components are CRUs and which
components are FRUs.
B700 xxxx Error Codes Description Action
6971 PCI bus failure
1. Use the “PCI expansion card (PIOCARD)
problem isolation procedure” on page 194
to determine the failing component.
2. If the problem persists, replace the
system-board and chassis assembly, as
described in “Replacing the FRU
system-board and chassis assembly” on
page 260.
6972 System bus error Replace the system-board and chassis
assembly, as described in “Replacing the FRU
system-board and chassis assembly” on page
260.
6973 System bus error
1. Use the “PCI expansion card (PIOCARD)
problem isolation procedure” on page 194
to determine the failing component.
2. If the problem persists, replace the
system-board and chassis assembly, as
described in “Replacing the FRU
system-board and chassis assembly” on
page 260.
6974 Informational system log entry only. No corrective action is required.
6978 Informational system log entry only. No corrective action is required.
6979 Informational system log entry only. No corrective action is required.
697C Connection from service processor to
system processor failed.
Replace the system-board and chassis
assembly, as described in “Replacing the FRU
system-board and chassis assembly” on page
260.
6980 RIO, HSL or 12X controller failure Replace the system-board and chassis
assembly, as described in “Replacing the FRU
system-board and chassis assembly” on page
260.
6981 System bus error. Replace the system-board and chassis
assembly, as described in “Replacing the FRU
system-board and chassis assembly” on page
260.
6984 Informational system log entry only. No corrective action is required.
6985 Remote I/O (RIO), high-speed link
(HSL), or 12X loop status message.
Replace the system-board and chassis
assembly, as described in “Replacing the FRU
system-board and chassis assembly” on page
260.
6987 Remote I/O (RIO), high-speed link
(HSL), or 12X connection failure.
Replace the system-board and chassis
assembly, as described in “Replacing the FRU
system-board and chassis assembly” on page
260.
46 Power Systems: Problem Determination and Service Guide for the IBM Power PS700 (8406-70Y)

IBM Power PS700 Specifications

General

Brand	IBM
Model	Power PS700
Category	Server
Language	English