Current Boot Sequence
1. Diskette
2. Ethernet (Integrated)
3. SCSI CD-ROM id=3 (slot=1)
4. SCSI 5MB Hard Disk id=6 (slot=1)
5. SCSI 5MB Hard Disk id=5 (slot=5)
.------.
|X=Exit|
------'
===>
Figure 7-6. Text-based System Management Services - Boot Sequence Screen
Restore Default Settings: Restores the boot list to the default sequence of:
The primary diskette drive
CD-ROM drive
Tape id=5
Hard disk drive id=6
Network device.
Selecting any of the Configure Boot Device options displays the following screen.
Chapter 7. System Management Services 7-31
To Next Page
Loading...
