1 - Fan assembly FRUs
2 - Power supply FRUs with integral fans
Figure 4 shows more details about the power supply and fan FRUs.
1 - AC power socket
2 - Power supply handle
3 - Integral fan air inlet
4 - DC status LED
5 - AC status LED
6 - Fan air inlet
7 - Fan assembly handle
Switch management
You can use the management functions built into the switch to monitor the fabric
topology, port status, physical status, and other information to help you analyze
switch performance and to accelerate system debugging.
For information about upgrading the version of Fabric OS installed on your switch,
see the “Getting help” on page ix and also see the Fabric OS Administrator's Guide.
You can manage the switch using any of the management options listed in the
following table.
1
2
b42r003
Figure 3. Nonport side of the switch
1 2
3 6
4
5
7
AIRFL
b42r004
Figure 4. Power supply and fan details
Chapter 1. Overview of the SAN42B-R switch 5
To Next Page
Loading...
