Figures
1. Port side view of the SAN42B-R ......4
2. Port numbering in the switch .......4
3. Nonport side of the switch ........5
4. Power supply and fan details .......5
5. Items in the fixed rack mount kit .....11
6. Attaching the front bracket .......12
7. Attaching the bracket extensions to the switch 13
8. Positioning the switch in the rack .....14
9. Attaching the rear brackets to the extensions
(long brackets shown) .........15
10. Rear bracket attachment details ......15
11. Attaching the rear bracket to the rack post 16
12. Attaching the front bracket to the rear of the
switch ..............17
13. Attaching the extension brackets to the front of
the switch .............18
14. Positioning the switch flush to the rear of the
rack ...............19
15. Attaching the rear brackets to the extensions at
the front of the switch .........20
16. Attaching the short or long rear brackets to the
extensions .............20
17. Attaching the rear brackets to the front rack
posts ...............21
18. Installing a 16 Gbps SFP+ with pull tab
(shown without cable attached for clarity) . . 29
19. LEDs on the port side of the switch ....33
20. Nonport side LEDs ..........36
21. Switch power supply components .....40
22. Removing and replacing a power supply in
the switch .............41
23. Fan components ...........42
24. Removing and replacing a fan in the switch 43
25. Location of battery holder........46
26. Powercap covering battery .......47
27. Identifying the origin of failure ......55
© Copyright IBM Corp. 2014 v
To Next Page
Loading...
Need help?
General