can be higher than the connected equipment. In nearly all of those cases, there is
enough attenuation in the existing cable plant so as not to require additional
attenuation. The common 2 Gbps SFP Rx maximum power levels are listed in
Table 23 and can be used as a quick method to relieve concerns of over saturation.
Table 23. Maximum receive power of 2 Gbps LWL SFPs
Vendor Part number Description
Max receive power
(dB)
Avago AFCT-57M5ATPZ 2 Gbps 10 km SFP -3 dB
Finisar FTLF1319P1xTL 2 Gbps 10 km SFP 0 dB
Finisar FTRJ1319P1xTL 2 Gbps 10 km SFP 0 dB
JDSU JSH-12L1DD1 2 Gbps 10 km SFP 1 dB
Hitachi Cable HTR6517 2 Gbps 10 km SFP -3 dB
Optoway SPS-9110FG 2 Gbps 10 km SFP -3 dB
Optoway SPS-9110AFG 2 Gbps 10 km SFP -3 dB
JDSU JSH-21L3AR3 2 Gbps 10 km SFP 1 dB
E20 ES212-LP3TA 2 Gbps 10 km SFP -3 dB
58 SAN42B-R Installation, Service, and User Guide
To Next Page
Loading...
Need help?
General