IBM SAN42B-R - Attaching the Rear Brackets to the Extensions; Attaching the Short or Long Rear Brackets to the Extensions

1 - Rear brackets
2 - Screws, 6-32 x 1/4-in., panhead Phillips
3. Using the first and third vertical pairs of holes for the screws, attach the
brackets with four 6-32 x 1/4-in. panhead screws (2). See Figure 16
1 - Rear brackets (long brackets shown)
b42r015
2
1
Figure 15. Attaching the rear brackets to the extensions at the front of the switch
b42r016
1
2
Figure 16. Attaching the short or long rear brackets to the extensions
20 SAN42B-R Installation, Service, and User Guide