Appendix A. Product specifications
This appendix provides the specifications for the SAN42B-R switch. The SAN42B-R
provides Fibre Channel, FICON, and FCIP performance for remote replication,
backup, and migration. Up to 24 2/4/8/16 Gbps ports Fibre Channel ports, 16
1/10 GbE, and two 40 GbE optical ports support scalable bandwidth, port density,
and throughput that extend Storage Area Network (SAN) fabric connectivity over
distance.
v “System specifications”
v “Fibre Channel specifications” on page 50
v “Ethernet specifications” on page 50
v “Connectors” on page 50
v “LED specifications” on page 50
v “Weight and physical dimensions” on page 51
v “Environmental requirements” on page 51
v “Power supply specifications” on page 52
v “Power consumption per chassis (typical configuration)” on page 52
v “Power consumption chassis (maximum configuration)” on page 52
v “Ethernet port specifications” on page 52
v “Fibre Channel data transmission range specifications” on page 53
v “Serial port specifications (pinout RJ-45)” on page 53
v “Memory specifications” on page 54
System specifications
Table 8. SAN42B-R system specifications
System component Description
Enclosure 2U chassis
System architecture Non-blocking shared-memory Extension
Switch
System processors
Quadcore (P3041) Freescale (PowerPC
®
)
processor, 1.5 GHz Cavium 6880 for
frame/ packet processing
Blitzer for Encryption and Compression
(Xilinx Kintex-7)
Condor-3 for FC Trident+ for 10/40 GE
Power supplies Two universal AC input power supplies, one
redundant (each power supply has an
integral fan unit)
Fans Three port-side exhaust 11000-RPM 80mm x
80mm Fan FRUs
Cooling Forced-air cooling (air flows from the
non-port side of the switch to the port side)
© Copyright IBM Corp. 2014 49
To Next Page
Loading...
