6.6-1
6.6 Can I Change The Print Direction?
ICE Torus printers are shipped with certain “Default” settings, including the direction of travel
of the product, i.e. left-to-right or right-to-left.
As standard the ICE Torus printer is shipped with the direction default:- Left-to-Right
By navigating from the Home page to: Tools>Set Up>Printhead, the current direction setting
can be viewed, as shown in Figure 6.6-1 below.
Figure 6.6-1
The default setting can only be changed by using CLARiTY™ Configuration Manager.
To change this parameter, please see section 12.0 later in this guide.
Product Direction