10.1-1
10.1 Installing CLARiTY™ Configuration Manager
To install CLARiTY™ Configuration Manager on a PC, insert the CLARiTY™ Configuration
Manager CD-ROM, part number - 400764 and the installation routine will automatically
commence.
Simply follow the on-screen instructions. (Note: if your PC has its “autorun” facility disabled,
the installation routine will not automatically start.
Click on ‘START’, followed by ‘RUN’ and then type into the dialog box - D:\setup.exe
followed by ‘OK’
PLEASE NOTE: D: is the drive letter of the PC’s CD-ROM drive… if your CD drive is
different, substitute the letter D with the appropriate drive letter.
To Next Page
Loading...
Need help?
General
