Ice Torus 126 Getting Started Guide

6.3-3
6.3.3 The Mounting Bracket
It is recommended to mount the printer to the side of the conveyor using the recommended
printer bracket, part number - 402283, as illustrated below.
Conveyor Mounting Bracket
The Mounting Bracket for the ICE Torus printer has been specifically designed to allow quick
and easy installation.
The mounting bracket allows the ICE Torus printer to be adjusted in the vertical and
horizontal planes, to allow for a variety of product widths and heights to be accommodated.
X
Z
Y
Figure 6.3-3

Ice Torus 126 Specifications

General

Brand	Ice
Model	Torus 126
Category	Printer
Language	English