9-1
9 Adding Ink
ICE Torus 126 ink – part number – 402676
ICE Torus 500 ink – part number – 402677
PLEASE NOTE: Ink should only be added when the ink low level warning is displayed on
CLARiTY™, i.e. the ink status bar is below 5%
This ensures the canister currently fitted is completely empty before adding a replacement
If the ‘Consumables’ meter status is ‘Red’ before a new canister is fitted, the ICE Torus will
go through a longer filling cycle before allowing printing to commence.
Press on the ‘Consumables’ area of the Home Page.
Figure 9.1-1
Consumables Bar
To Next Page
Loading...