8.3-1
8.3 Initial Checks
Before proceeding, please ensure the following:-
• the printer is mounted in its working orientation
• the ICE Torus 500 is connected to the mains power
• the ICE Torus 500 is connected to the compressed air supply
• the air regulator is turned on and set to 4.5 Bar Maximum
• the internal ink reservoir shipping cap has been removed and replaced with the air
pipe and stainless steel fitting
• the vent cap has been correctly fitted and aligned
• the Ink Feed Pipe has been connected to the Reclaim Filter assembly
To Next Page
Loading...
Need help?
General
