Icom IC-2300H - 5 MEMORY OPERATION: Channel Selection; Selecting Memory Channels

Previous view
18
■ Memory channel selection
Using the tuning dial D
q Push [M/CALL] once or twice to select the memory
mode.
• The “ ” icon appears.
w Rotate [DIAL] to select the desired memory channel.
• Only programmed memory channels can be se-
lected.
D Using [Y] or [Z] on the HM-133V
z Push [MR] to select the memory mode.
x Push [Y] or [Z] to select and set the desired mem-
ory channel.
• Pushing [Y] or [Z] for 1 second activates a scan. If
a scan starts, push [ CLR ] to stop it.
D Using the keypad on the HM-133V
z Push [MR] to select the memory mode.
x Push [ENT] to activate the keypad for numerical
input.
c Push three appropriate numeric keys to input a
channel number.
• Push only 1 appropriate digit key, [1] , [2] or
[3] , and then push [M] or [#] to select the
scan edge channels. “M” and “#” can be used for “A”
and “B” respectively.
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
Appears
Push [M/CALL] to select the memory mode.
Memory channel number
Rotate [DIAL] to select the desired memory channel.
Selected memory channel
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
Appears
Push to select the memory mode.
Memory channel number
Push to select the desired memory channel.
Selected memory channel
/
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
Appears
Memory channel number
Push .
Push to select the memory mode.
Push , and then push .
Selected memory channel
[i.e.]: Selecting memory channel 2.
[i.e.]: Selecting memory channel 2.
[i.e.]: Selecting memory channel 2.
5
MEMORY OPERATION