Icom IC-2300H - 6 CALL CHANNEL OPERATION; Call Channel Selection and Copying

Previous view
27
CALL CHANNEL OPERATION
6
■ Call channel selection
➥ Push [M/CALL] once or twice to select the Call
channel.
• “C” appears instead of a memory channel number.
• Push [M/CALL] to return to the memory mode, or push
[V/MH z] to select the VFO mode.
Using the HM-133V
➥ Hold down [CALL] for 1 second to select the
Call channel.
• Push [MR] to select the memory mode, or
push [VFO] to select the VFO mode.
■ Copying Call channel contents
The contents of Call channel can be copied to another
channel or to the VFO.
q Push [M/CALL] several times to select the Call
channel.
• “C” appears.
w To copy the Call channel contents to a Memory
channel, push [MW] (S.MW), and then rotate [DIAL]
to select the memory channel to be copied.
• The “ ” icon and memory channel number blink.
e Hold down [MW] (S.MW) for 1 second to copy.
• If channel names have been programmed into the
Call channel, the names are also copied.
• To copy to the VFO, hold down [MW] (S.MW) for
1 second.
Using the HM-133V
z Hold down [CALL] for 1 second to select the
Call channel.
x Push [FUNC] , then [MW] , and then push
[Y] or [Z] to select the memory channel to copy the
contents.
c Push [FUNC] , then hold down [MW] for
1 second to copy when a momentary push was used
in the previous step.
• If channel names have been programmed into the
Call channel, the names are also copied.
• To copy to the VFO, push [FUNC] , and then
hold down [MW] for 1 second.
✔INFORMATION
When the VFO mode is selected from the Call channel,
a small “c” appears instead of memory channel number.
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
Appears
Push [M/CALL] once or twice to select the Call channel.
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
Appears
Hold down for 1 second to select the Call channel.
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
Push [S.MW] .
Rotate [DIAL] to select the memory channel.
Hold down [S.MW] for 1 second.
The selected memory channel.
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
LOCK
S E T
ANM
MONI
DUP
LOW
T
-
SCAN
TONE
PRIO
M/CALL
SCAN
V/MHz
DIGITAL
PRIO
AO
BUSY
MUTE
NAR
MID
LOW
Push then .
Push to select the memory channel.
Push , then hold down for 1 second.
/
The selected memory channel.
[i.e.]: Copying the Call channel (145.000 MHz) to
memory channel 2.
[i.e.]: Copying the Call channel (145.000 MHz) to
memory channel 2.