10
4
SCAN OPERATION
4
D Setting scan resume condition
q Push [
O
]
(Bank/Func)
for 1 sec. to enter Function mode.
w Push [
O
]
(Bank/Func)
for 1 sec. again to enter Set mode.
e Push [SCN] for 1 sec. to enter the common setting for the
transceiver.
r Push [SCN] several times until “SST” appears.
t Push []/[]to select the desired scan resume condi-
tion.
- “T-5” : Scan pauses for 5 sec. then resumes.
- “T-10” : Scan pauses for 10 sec. then resumes.
- “T-15” : Scan pauses for 15 sec. then resumes.
- “P-5” : Scan pauses until the signal disappears, then resumes
5 sec. after the signal disappears.
y Push [SCN] for 1 sec., then push [
O
] for 1 sec. to return to
Normal mode.
SST appears
Push [SCN]
Channel*Bank*
The keys under these indicators can be activated.
*The bank and channel number
are continuously displayed af-
ter entering set mode.
Push [
O
] for 1 sec.
To Next Page
Loading...
