18
6
SELCALL OPERATION
6
e Push [MONI] (Call) to set the TX code channel, and return
to Function mode.
r Push [MONI] (Call) to transmit the code on the selected
channel.
✔
CONVENIENT!
• The TX code channel name can be assigned to the all 32
TX code channel via the optional CS-400PRO
CLONING
SOFTWARE
. The TX code channel name allows you to easy
to select the channel, find the channel user, and so on.
• The long tone function is useful and provides you to proper
individual or group call even through a repeater, or when the
calling station is in scanning operation. The long tone func-
tion can be activated in Set mode. (p. 30)
D TX code number edit
The [MONI] (Call) key (in Function mode) enables you to
change the TX code contents within the allowable digits.
The group call function works by allowing you to edit a special
‘group code’ into the last 2 digits position of the SelCall ID
code.
To edit a TX code:
q While in Function mode, push [MONI] (Call) for 1 sec. to
enter the TX code channel selection mode.
• Push [
O
]
(Bank/Func)
for 1 sec. to enter the transceiver into
Function mode.
• Push []/[]to select the desired TX code channel, if desired.
w Push [MONI] (Call) for 1 sec. again to enter the TX code
edit mode.
e Push [MONI] (Call) to select the desired digit to be edited.
• Editable digit blinks
To Next Page
Loading...
