Icom IC-400PRO - I Voice Scrambler Function

23
7
OTHER FUNCTIONS
The voice scrambler function provides communication priva-
cy. The optional UT-109/110 (#02)
VOICE SCRAMBLER UNITS
provides high performance private communication between
stations with the same scrambling codes. The scrambler is
not compatible with the IC-4088S’s scrambler system.
• The scrambler group code is must be set in advance using
the optional CS-400PRO when the UT-110 is installed.
• ACA class licence inhibits using this function in channels
5, 11 and 35, or while accessing a repeater.
q Push []/[]to select the desired channel.
• Except for the channels 5, 11 or 35.
w While in Function mode, push [
O
] (Bank/Func) for 1 sec.
to enter Set mode.
• Push [
O
] (Bank/Func) for 1 sec. to enter the transceiver into
Function mode.
e Push [MONI] for 1 sec. to enter the individual setting.
r Push [MONI] several times until “SCR” appears.
t Push [DUP] to turn the scrambler function ON.
t Push []/[]to select the desired code.
• Available codes;
- UT-109 (Non-rolling type): 1 to 32
- UT-110 (Rolling type): 1 to 255
y Push [MONI] for 1 sec. to exit the individual setting, then
push [
O
] for 1 sec. to exit Set mode.
Push [] or []
The scrambler
code appears
Push [DUP]
SCR appears
Push [MONI]
Channel*Bank*
The keys under these indicators can be activated.
*The bank and channel number
are continuously displayed af-
ter entering set mode.
Push [
O
] for 1 sec.
■ Voice scrambler function (optional UT-109/110 is required)
[
IC-400PRO.qxd 03.6.19 6:13 PM Page 23 (1,1)