Icom IC-400PRO - I RX Frequency Setting

25
7
OTHER FUNCTIONS
The receive frequency in the private bank channels can be
re-programmed within 450 to 500 MHz frequency range
depending on the setting.
q Push []/[]to select the desired channel.
w While in Function mode, push [
O
]
(Bank/Func) for 1 sec.
to enter Set mode.
• Push [
O
] (Bank/Func) for 1 sec. to enter the transceiver into
Function mode.
• The bank and channel can be selected after entering Set mode.
e Push [MONI] for 1 sec. to enter the individual setting.
r Push [MONI] several times until the RX frequency appears.
t Push [DUP] to enter the RX frequency setting mode.
y Push [DUP] to select the desired digit to be edited.
u Push []/[]to set the desired number.
Push [] or []
Push [DUP]
The first digit starts blinking.
Push [DUP]
RX frequency appears
Push [MONI]
Channel*Bank*
The keys under these indicators can be activated.
*The bank and channel number
are continuously displayed af-
ter entering set mode.
Push [
O
] for 1 sec.
■ RX frequency setting (for private banks only)
[
IC-400PRO.qxd 03.6.19 6:13 PM Page 25 (1,1)