Icom IC-400PRO - Page 24

19
6
SELCALL OPERATION
r Push []/[]to set the desired code.
• Select “❋” when group code is set.
t Push [MONI] (Call) to set the code and the editable digit
move to right automatically.
y Repeat step r and t to input all allowed digits.
u Push [MONI] (Call) to set the TX code.
i Push [MONI] (Call) to return to Function mode.
o Push [MONI] (Call) to transmit the code on the selected
channel.
NOTE: The TX code editable digit can only be set/changed
with the optional CS-400PRO
CLONING SOFTWARE .
Push [MONI]
Appears while transmitting
Push [MONI]
Push [MONI]
Push [] or []
IC-400PRO.qxd 03.6.19 6:13 PM Page 19 (1,1)