33
7
OTHER FUNCTIONS
• RX frequency
The receive frequency can be re-programmed from the
transceiver if permitted. (p. 25)
q While the receive frequency is displayed, push [DUP] to
enter the RX frequency setting mode.
w Push [DUP] to select the digit to be edited.
e Push []/[]to set the desired number.
r Push [DUP] to set the number and the editable digit
move to right.
t Repeat step e and r to input the desired frequency.
y Push [DUP] to set the RX frequency.
To Next Page
Loading...
