Icom IC-7300 - Page 37

4
RECEIVING AND TRANSMITTING
1
2
3
4
5
6
7
8
9
1
0
1
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
2
0
2
1
4-7
VOX function
D Turning ON the VOX function
1. 6HWWKHRSHUDWLQJPRGHWR66%$0RU)0
  ([DPSOH86%
2. Push
VOX/BK-IN
to turn ON the VOX function.
LPushing
VOX/BK-IN
again turns OFF the VOX
function.
Displayed
The VOX (Voice-Operated Transmission) function
switches between transmit and receive with your
voice. This function enables a hands-free operation.
D $GMXVWLQJWKH92;IXQFWLRQ
%HIRUHXVLQJWKH92;IXQFWLRQDGMXVWWKHIROORZLQJ
items.
• VOX GAIN
• ANTI VOX
• DELAY
• VOICE DELAY
1. Hold down
VOX/BK-IN
for 1 second.
• Opens the VOX menu.
2. Touch the adjusting item.
(Example ANTI VOX)
3. Adjust the selected item.
LAdjust to the point where the transceiver does not
switch to transmit due to the sound from the speaker
or other devices.
LTouching VOICE DELAY selects “SHORT,” “MID,”
“LONG” or “OFF.”
VOX GAIN (Default 50 )
Adjust the transmit receive switching threshold level
to between 0 and 100 for VOX operation. Higher
values make the VOX function more sensitive to your
voice.
ANTI VOX (Default 50 )
Adjust the ANTI VOX level to between 0 and 100
to prevent unwanted VOX activation from the speaker
or other sounds. Higher values make the VOX function
less sensitive.
DELAY (Default 0.2s)
Adjust the DELAY to between 0 and 2.0 seconds, for
a convenient interval for normal pauses in speech
before returning to receive.
VOICE DELAY (Default OFF)
Set the VOICE DELAY to prevent picking up your
voice when switching to transmit.
Select “SHORT,” “MID,” “LONG” or OFF.
Rotate
Push