EasyManua.ls Logo

Icom IC-756 - Split Frequency Operation

Icom IC-756
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
4
RECEIVE AND TRANSMIT
Split frequency operation allows you to transmit and
receive in the same mode on two different frequen-
cies. The split frequency operation is basically per-
formed using 2 frequencies on the main and sub
readouts.
Following is an example of setting 21.290 MHz for re-
ceiving and 21.310 MHz for transmitting.
q Set 21.290 MHz (USB) in VFO mode.
w Push [SPLIT] momentarily, then push [CHANGE]
for 2 sec.
- The quick split function is much more convenient for
selecting the transmit frequency. See the next section
for details.
- Equalized transmit frequency and
appear on
the LCD.
-
appears to show the transmit frequencys read-
out.
e Rotate the tuning dial while pushing [XFC] to set
the transmit frequency to 21.310 MHz.
- The transmit frequency can be monitored while push-
ing [XFC] or using dualwatch.
r Now you can receive on 21.290 MHz and transmit
on 21.310 MHz.
To change the transmit and receive frequencies, push
[CHANGE] to exchange the main and sub readouts.
DIRECT SHIFT FREQUENCY INPUT
The shift frequency can be entered directly.
q Push [F-INP].
w Enter the desired shift frequency with the digit
keys.
- 1 kHz to 1 MHz can be set.
- When you require a minus shift direction, push [] in
advance.
e Push [SPLIT].
- The shift frequency is input in the sub readout and the
split function is turned ON.
[EXAMPLE]
DUALWATCH FUNCTION
The dualwatch function is convenient for tuning the
transmit frequency while monitoring both frequencies
used for transmitting and receiving.
SPLIT LOCK FUNCTION
Accidentally releasing the [XFC] switch while rotating
the tuning dial changes the receive frequency. To pre-
vent this, use both the split lock and dial lock functions
to change the transmit frequency only. The split lock
function cancels the dial lock function while pushing
[XFC] during split frequency operation.
The dial locks effectiveness during split frequency op-
eration can be selected in the set mode for both re-
ceive and transmit frequencies; or only the receive
frequency. (p. 57)
CONVENIENT
CONVENIENT
CONVENIENT
TXTX
SPLITSPLIT
Split frequency operation
1ß
21.290.00
VFOVFO
USBUSB
USBUSB
14.100.0014.100.00
14.205.0014.205.00
USBUSB
USBUSB
14.100.0014.100.00
TX
ANTANT
1
METERMETER
PoPo
P.AMPP.AMP
OFFOFF
ATTATT
OFFOFF
2.4k2.4k9 2.8k2.8k455455
12:3412:34
VFOVFO
1ß
1
F-INP SPLIT
F-INP
3
SPLIT
To operate on 1 kHz
higher frequency:
To operate on 3 kHz
lower frequency:
1ß
VFOVFO
1ß
21.290.00
VFOVFO
USBUSB
USBUSB
14.100.0014.100.00
21.290.0021.290.00
USBUSB
USBUSB
14.100.0014.100.00
ANTANT
1
METERMETER
PoPo
P.AMPP.AMP
OFFOFF
ATTATT
OFFOFF
2.4k2.4k9 2.8k2.8k455455
SPLITSPLIT
TX
12:3412:34
1ß
1ß
21.290.00
VFOVFO
USBUSB
USBUSB
14.100.0014.100.00
21.310.0021.310.00
USBUSB
USBUSB
14.100.0014.100.00
ANTANT
1
METERMETER
PoPo
P.AMPP.AMP
OFFOFF
ATTATT
OFFOFF
2.4k2.4k9 2.8k2.8k455455
SPLITSPLIT
TX
VFOVFO
12:3412:34

Table of Contents

Other manuals for Icom IC-756

Related product manuals