Icom IC-756 - Power-Off Period and Timer Operation

52
7
CLOCK AND TIMERS
The transceiver can be set to turn OFF automatically
after being activated via the power-on timer. The
power-off period can be set to 5–120 min. in 5 min.
steps.
q If the start up screen is not selected (if [F-5]’s func-
tion is [EXIT]), push [F-5] one or more times to exit.
w Push [(F-5)SET] then [(F-3)TIME] to enter timer set
mode.
e Push [
(F-1)Y] or [(F-2)Z] to select the power-off pe-
riod item.
r Set the desired power-off periods using the tuning
dial.
- “TIMER – set push [SET]” blinks.
t Push [(F-4)SET] to enter the set time.
- Push [(F-5)EXIT] to cancel the setting.
y Push [(F-5)EXIT] twice to exit timer set mode.
■ Setting power-off period
[TIMER SET][TIMER SET]
≥≥
VOXVOX
ONON
COMPCOMP
OFFOFF
≤≤
AGCAGC
MIDMID
EXITEXIT
19:30
 60min
Power-ON timer set
Power-OFF period
12:34
Time (now)
[TIMER SET][TIMER SET]
≥≥ SETSET
VOXVOX
ONON
COMPCOMP
OFFOFF
≤≤
AGCAGC
MIDMID
EXITEXIT
19:30
 45min
Power-ON timer set
Power-OFF period
12:34
Time (now)
TIMER-set push [SET]
q Preset the power-on time and power-off period as
described previously.
w Push [POWER] momentarily to turn the timer func-
tion ON.
- The [POWER] light lights when the timer function is
ON.
e Push [POWER] for 2 sec. to turn the power OFF.
- The [POWER] light lights continuously.
r When the set time arrives, the power is automati-
cally turned ON.
t The transceiver emits 10 beeps and turns OFF
after the power-off period elapses.
- The [POWER] light blinks while beeping.
- Push [POWER] momentarily to cancel the power-off
timer, if desired.
■ Timer operation
[POWER]