23
3
BASIC OPERATION
➥ Push [VFO/MEMO] to switch between VFO and
memory modes.
•“VFO” appears when VFO mode, or the selected mem-
ory channel number appears when memory mode is
selected beside the frequency readout.
•Pushing [VFO/MEMO] for 1 sec. transfers the contents
of the selected memory channel to VFO mode. (p. 80)
■ Selecting VFO/memory mode
➥ Push [MAIN/SUB] to select access to the main or
sub readout.
•The sub readout frequency is displayed in outline or
mesh font. The sub readout functions only during split
oeration or dualwatch.
To Next Page
Loading...
