62
5
FUNCTION FOR RECEIVE
■ DSP filter shape
The type of DSP filter shape for each SSB and CW
can be selected independently from soft and sharp.
q Push [EXIT/SET] several times to close a multi-
function screen, if necessary.
w Push [EXIT/SET] switch for 1 sec. to enter set
mode.
e Push [(F-3)DSP] to enter the DSP filter set mode.
r Push one of [(F-2)SSB-FIL] or [(F-4)CW-FIL] to
select the desired DSP filter shape from sharp and
soft for each SSB or CW mode, respectively.
t Push [EXIT/SET] twice to exit the set mode.
To Next Page
Loading...
