40
4
RECEIVE AND TRANSMIT
DD
Editing a memory keyer
4
The contents of the momory keyer memories can be
set using the memory keyer edit menu. The memory
keyer can memorize and re-transmit 4 CW key codes
for often-used CW sentences, contest number, etc.
Total capacity of the memory keyer is 70 characters
per memory channel.
• Pre-programmed contents
•Programming contents
q Push [EXIT/SET] several times, if necessary.
w Push [CW/RTTY] to select CW mode.
e Push [(F-3)KEYER] then [EXIT/SET] to select
keyer set mode.
r Push [(F-2)EDIT] to enter the keyer edit screen.
t Push [(F-5)M1..M4] several times to select the de-
sired keyer memory channel.
y Select the desired character group by pushing the
character group keys ([ABC], [123] or [etc]) sev-
eral times.
•[etc] appears when [123] is pushed when “123” char-
acter group is selected.
•Selectabel characters (with the tuning dial);
NOTE:
“^” is used to transmit a following word with no
space such as
AR
. Put “^” before a text string
such as ^AR, and the string “ ” is sent with
no space.
“✱” is used to insert the CW contest number.
The contest number automatically increments
by 1. This function is only available for one
memory keyer channel at a time. Memory
keyer channel M2 used “✱” by default.
u Select the desired character by rotating the tuning
dial or by pushing the band key for number input.
• Push [(F-1)
ΩΩ
] or [(F-2)
≈≈
] for cursor movement.
• Push [(F-3)DEL] to delete the selected character.
• Push [(F-4)SPACE] to input a space.
•“*” is for contact numbers and can be input for the
count up trigger channel (“ ” appears).
i Repeat step u until the desired contents are input.
o Push [(F-5)M1..M4] to select the next memory
channel and repeat step u for character input, if
desired.
!0 Push [EXIT/SET] twice to exit the keyer set mode.
. , @ ✽
To Next Page
Loading...
