Icom IC-F3400D

8
MDC 1200 SYSTEM OPERATION
8-15
D Transmitting an MDC Status call (Continued)
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD type
(Menu > Signaling/Call > Status)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select “Signaling/Call,”
then push [OK].
3. Push [Up] or [Down] to select “Status,” then push
[OK].
4. Push [Up] or [Down] to select a Status.
5. Hold down [PTT] to transmit an MDC Status call.
Transmitting a call (Continued)
• After receiving an acknowledgement, “Success” is
displayed.
• When the transceiver does not receive an
acknowledgement, “Failed” is displayed.
• After transmitting the Status call, returns to the
Standby screen.
Previous view