Icom IC-F3400D User Manual

7
NXDN™ OPERATION
7-19
Site Select function (For the Multi-site Trunking operation)
You can manually select a site without a Roaming
scan.
1. Push [Site Select] to display the “Site Select”
screen.
2. Push [Up] or [Down] to select a site from the
preset Site list*.
* Up to 48 valid Roaming areas are listed.
3. Push [OK] to set the selected site, and return to
the standby screen.
4. The transceiver tries to register to the selected
site.
Previous view

Icom IC-F3400D Specifications

General

Brand	Icom
Model	IC-F3400D
Category	Transceiver
Language	English