8
MDC 1200 SYSTEM OPERATION
8-22
Incoming Call log function
After receiving an MDC Sel Call, Call Alert call,
or Emergency call, the call log may be displayed,
depending on the presetting. Up to 5 calls can be
memorized, and the oldest call is deleted when a 6th
call is received.
D Checking the Incoming call log
(Menu > Signaling/Call > Incoming)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select “Signaling/Call,”
then
push [OK].
3. Push [Up] or [Down] to select “Incoming,” then
push [OK].
L If there is no log, an error beep sounds and the log is
not displayed.
• Incoming log is displayed.
To Next Page
Loading...
Need help?
General
