11
Bluetooth
®
OPERATION
11-7
Step 4: Connecting to the headset (Transceiver)
1. Push [Up] or [Down] to select the headset to
connect, then push [OK].
• Connects to the headset.
2. After the transceiver and the headset connection
has succeeded, “✔” is displayed beside the
headset icon.
3. Hold down [Back] for 1 second to return to the
standby screen.
• While connected to a Bluetooth
®
headset, “ ” is
displayed instead of “
.”
Pairing with a headset (Continued)
TIP: When you turn ON the transceiver, with the
“Auto Connect” item is set to ON, the transceiver
automatically connects to the last paired device.
After connecting, “ ” is displayed instead of “ .”
NOTE: The transceiver connects to the last
connected device, if the connecting operation is
performed on the device side, even if the “Auto
Connect” item is set to OFF.
To Next Page
Loading...
Need help?
General
