12
USER SETTINGS
12-9
Setting the VOX function
<Key operation>
Portable: For the Non-display types
1. Turn OFF the transceiver.
2. Set [Selector] to any channel other than Channel 16.
3. While holding down [F1] and [F2], turn ON the
transceiver. Continue holding down [F1] and [F2]
for about 3 seconds.
• 2 beeps sound.
• The transceiver enters the VOX function Set mode.
4. Push [F2] to turn ON, or push [F3] to turn OFF the
VOX function.
5. Turn OFF the transceiver, then turn it ON again to
exit the VOX function Set mode.
You can turn the VOX function ON or OFF.
The VOX function automatically switches between
receive and transmit in the voice mode.
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD types
( Menu > Functions > VOX)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select “Functions,” then
push [OK].
3. Push [Up] or [Down] to select “VOX,” then
push
[OK].
4. Push [Up] or [Down] to turn the VOX function ON
or OFF, then push [OK].
5. Hold down [Back] for 1 second to return to the
standby screen.
Mobile: For the Segment types
1. Turn OFF the transceiver.
2. While holding down [F2] and [F3], turn ON the
transceiver. Continue holding down [F2] and [F3]
for about 3 seconds.
• 2 beeps sound.
3. Hold down [F1] for 1 second to enter the Set
mode.
4. Push [F2] or [F3] to select the “A5” screen.
5. Push [Up] to turn ON, or push [Down] to turn OFF
the VOX function.
6. Hold down [F1] for 1 second again to exit the Set
mode.
7. Turn OFF the transceiver, then turn it ON again to
normally operate it.
[VOL]
[F1]
[F2]
[F3]
[Selector]
F1 F2 F3
[Up]
[Down][F1] [F2] [F3]
Power key
To Next Page
Loading...
Need help?
General
