13
OTHERS
13-2
Displaying the transceiver’s rmware information
<Key operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD types
1. Turn OFF the transceiver.
2. While holding down [P1] and [OK], turn ON the
transceiver.
• The transceiver enters the Firmware Information
mode.
3. Push [P1] to display the “Firmware Info” screen.
4. Push [Up] or [Down] to display the transceiver’s
firmware information.
5. Turn OFF the transceiver, then turn it ON again to
exit the Firmware Information mode.
You can display the transceiver rmware’s information.
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD types
( Menu > Information > Firmware Info)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select “Information,” then
push [OK].
3. Push [Up] or [Down] to select “Firmware Info,”
then
push [OK].
4. Push [Up] or [Down] to display the transceiver’s
firmware information.
5. Hold down [Back] for 1 second to return to the
standby screen.
To Next Page
Loading...
Need help?
General
