6
MENU SCREEN
6-3
Menu items
In the Menu screen, the items are categorized, as shown below.
Channel/Scan
C.Tone CH Select
Sets the Continuous tone channel.
p. 6-8
Compander
Turns the Compander function ON or OFF.
p. 6-8
Priority A CH
Selects the Priority A channel.
p. 6-8
Prio A (Rewrite)
Sets a current channel as the Priority A channel.
p. 6-8
Priority B CH
Selects the Priority B channel.
p. 6-8
Prio B (Rewrite)
Sets a current channel as the Priority B channel.
p. 6-8
RAN CH Select
Sets the RAN channel.
p. 6-8
RF Power
Selects the output power for each channel.
p. 6-8
Scan Tag (Scan Add/Del(Tag))
Sets or clears a Scan tag to or from a channel in a Scan list.
p. 6-8
Scan List
Sets a Scan list to be scanned.
p. 6-8
Scan Start/Stop
Starts or cancels a Scan.
p. 6-8
Scramble/Encrypt (Scrambler/Encryption)
Turns the Voice Scrambler or Encryption function ON or OFF.
p. 6-8
Talk Around
Turns the Talk Around function ON or OFF.
p. 6-8
Zone Select
Selects a Zone.
p. 6-8
Signaling/Call
Call List Select
Selects a calling destination.
p. 6-9
Call Menu
Selects a calling destination and a call type.
p. 6-9
Clear Incoming
Clears the received call log from the Incoming list.
p. 6-9
Clear Outgoing
Clears the transmit call log from the Outgoing list.
p. 6-9
DTMF Autodial
Displays the “DTMF Autodial” screen. The preset DTMF codes are selectable.
p. 6-9
Group Select
Displays the “Group Select” screen. The preset Group IDs are selectable.
p. 6-9
Incoming
Displays a log of the received calls.
p. 6-9
Individual Select
Displays the “Individual Select” screen. The preset Individual IDs are selectable.
p. 6-9
Message
Displays the “Message” screen. The preset Messages are selectable.
p. 6-9
Outgoing
Displays a log of the transmit calls
p. 6-9
☞ Continued on the next page
To Next Page
Loading...
Need help?
General
