Icom IC-M506 - Antenna; Fuse Replacement; Cleaning; Supplied Accessories

103
12
CONNECTIONS AND MAINTENANCE
New2001
Antenna ■
A key element in the performance of any communication sys-
tem is the antenna. Ask your dealer about antennas and the
best place to mount them.
Fuse replacement ■
One fuse is installed in the supplied DC power cable. If the
fuse blows or the transceiver stops functioning, track down
the source of the problem, repair it, and replace the damaged
fuse with a new one of the proper rating.
Fuse rating: 10 A
Cleaning ■
If the transceiver becomes dusty or dirty, wipe it clean with a
soft, dry cloth.
DO NOT use harsh solvents such as benzine or
alcohol, as they will damage transceiver surfaces.
Supplied accessories ■
Connection cable*
(OPC-1000: 6 m)
Mounting base*
Tapping screws*
(3×16 mm)
For microphone
Microphone*
Mounting bracketFor mounting bracket
DC power cable
(OPC-891A)
Microphone hanger
and screws (3×16 mm)
Knob bolts
Screws (5×20 mm)
Flat washers (M5)
Spring washers (M5)
* Not supplied or type is different, depending on the transceiver’s ver-
sions.