Icom IC-M506 - Page 19

New2001
10
4
BASIC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Channel group selection D
There are preprogrammed USA channels, International chan-
nels and Canadian channels. These channel groups may be
specified for the operating area.
q Push [MENU].
w Rotate dial or push
[Ω]/[≈] to select the “RADIO SET”
icon and then push the softkey below the icon.
 •RADIOSETTINGSmenuisdisplayed.
e Rotate dial or push [∫]/[√] to select “CHAN Group,” and
then push [ENT].
r Rotate dial or push [∫]/[√] to select the desired channel
group, and then push [ENT].
 •USA (USA), International (INT) and Canadian (CAN) channel
groups can be selected.
 •Push[BACK]toreturntothepreviousscreen.
t Push [EXIT] to exit the Menu screen.
y Rotate dial or push [∫](CH)/[√](CH) to select a channel.
 •Pushing[Y]/[Z] on the microphone selects only Favorite chan-
nels.
 •YoucanturnOFFtheFAVonMICsetting(p.100).Afterthat,you
can select all channels by the microphone.
 •The“DUP”iconappearswhenaduplexchannelisselected.
 •“A”appearswhenasimplexchannelisselected.
When the International
channel group is selected.
Channel group icon appears