Icom IC-M506 - Page 51

42
7
DSC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
New2001
Push [CALL] to transmit the Polling Request Call. r
 •IfChannel70isbusy,thetransceiverstandsbyuntilthechannel
becomes clear.
After the Polling Request Call has been transmitted, the t
following screen is displayed.
When the acknowledgement call is received, alarm sounds y
and the following screen is displayed.
Push [ALARM OFF] to stop the alarm, and then the screen u
as shown below is displayed.
Push [EXIT] to return to the normal operating mode. i