20
7
PRIORITY WATCH
■ Priority watch types
Priority watch checks for signals on a frequency every 5 sec.
while operating on a VFO frequency or scanning. The trans-
ceiver has 3 priority watch types to suit your needs.
In addition, you can be alerted with beeps and a flashing “ë.”
The watch resumes according to the selected scan resume
condition. See p. 18 for details.
If the pocket beep function is activated, the transceiver au-
tomatically selects the tone squelch function when priority
watch starts.
MEMORY or CALL
CHANNEL WATCH
While operating on a VFO
frequency, priority watch
checks for a signal on the
selected memory or call
channel every 5 sec.
•A memory channel with skip in-
formation can be watched.
MEMORY SCAN
WATCH
While operating on a VFO
frequency, priority watch
checks for signals on each
memory channel in se-
quence.
•The memory skip function is
useful to speed up the scan.
VFO SCAN WATCH While scanning in VFO
mode, priority watch checks
for signals on the selected
memory or call channel
every 5 sec.
5 sec.
125 msec.
5 sec.
125 msec.
5 sec.
125 msec.
To Next Page
Loading...
Need help?
General
