5
2
PANEL DESCRIPTION
o SKIP SCAN INDICATOR (p. 18)
➥“SKIP” appears when a selected memory channel is set
as a skip channel.
➥“PSKIP” appears when the memory channel frequency
is set as a skip frequency during scanning.
!0 SIGNAL INDICATORS
Shows the relative signal strength while receiving.
!1 PRIORITY WATCH INDICATOR (p. 20)
Appears when priority watch is in use.
!2 BUSY INDICATOR
“BUSY” appears when receiving a signal or when the
squelch is open.
!3 BATTERY INDICATORS
➥Both segments appear when the batteries have enough
capacity.
➥Only the right segment appears when the batteries are
nearing exhaustion.
➥Flash when battery replacement is necessary.
!4 LOCK INDICATOR (p. 8)
Indicates that the lock function is in use.
To Next Page
Loading...
