Icom ID-1

51
7 TRANSMIT AND RECEIVE— VOICE
New2001
D Short message operation— RC-24 (continued)
oPush [CALL] to turn the message transmission ON.
!0Push [PTT] to make a call.
• The message is transmitted immediately with your voice.
• When transmitting continuously, the message is transmitted in
each 30 sec.
!1When a message is received, the message indicator, “✱,”
blinks.
• Only 1 message can be stored for reception in the RC-24.
• The same message sending from the same call sign station
won’t be displayed repeatedly.
• The message in the RC-24 will be cleared when ID-1 is powered
OFF.
!2Push [TXinh• ] then push [SQL] to select “RX Mes-
sage” indication.
• The message indicator “✱,” disappears.
!3Push [CALL] or [MODE] to scroll the message manually.
• Pushing [CALL], scrolls the message to left; pushing [MODE]
scrolls the message to right.
!4Push [V/M] to display the call sign.
• Push [CALL] or [MODE] to scroll the note, if necessary.
!5Push [TXinh• ] to return to exit from the message indi-
cation condition.
Call sign is displayed here.
Message is displayed here.
Push [V/M] to toggle between message
and call sign indications.
RX:
å
ç
å
ç
TR
RX
Message
DV
1294.500 00
RP-
Message indicator blinks.
[CALL]
TX Message TR
Ch1
ON :How are
ID-1_ENG_2.qxd 04.9.22 9:29 Page 51 (1,1)