Icom ID-RP2010V - Network Connectivity; Connecting Multiple Repeaters; Connecting to ID-RP2 C Controller

11
3
DIGITAL REPEATER SETTING
Using a Gateway server
L IP addresses shown in the gure are examples. Set appropriate IP addresses according to your environment.
[LAN 1]
172.16.0.1/24
GW: Blank
eth1 (To the repeater)
172.16.0.20/24
GW: Blank
Gateway server (Linux PC)
To an existing network
eth0 (To the router)
10.0.0.200/8
GW: 10.0.0.201
Router (1)
[LAN]
10.0.0.201/8
[WAN]
[WAN]
192.168.1.250/24
GW: 192.168.1.1
192.168.1.1/24
Modem
Trust
server
Internet
[LAN]
Router (2)