FM REPEATER SETTING
17
4
Utility for ID-RP3 settings (Network settings)
D [LAN 1] port settings
Using the DHCP client function:
Select “ON” in “DHCP” to get an IP address from
existing network.
Manually entering an IP address:
Select “OFF” in “DHCP,” and then enter a fixed IP
address and Subnet mask.
D Time settings
Turn ON or OFF the Network Time Protocol (NTP)
function.
If the NTP function is turned ON, the repeater gets the
exact time through a network.
L The setting required for giving a le-generating date
when saving a setting le (icf).
L Use default NTP server address if there are no problem.
To Next Page
Loading...
