Icom ID-RP2010V - Antenna and Regulatory Information; Antenna Connector Details; Regulatory Compliance and Disposal; Optional LTE Unit

19
6
ERROR INDICATION
The Receive indicator [RX] ( ) and Transmit indicator [TX] ( ) on the repeater indicates an error, as shown
below.
L If multiple errors occur, the indicators will light up in the order shown below. When one error is resolved, the light that
indicated it disappears.
No. TX RX Error Ref.
1
Repeats blinking
twice
(1 second cycle)
and turning off
for 3 seconds.
- - • Firmware version inconsistency
(CPU, DSP, FPGA)
• Startup failure
-
Unable to detect a Gateway server connection. pp.13, 14
2 - -
Repeats
blinking twice
(1 second
cycle) and
turning off for 3
seconds.
Failed to synchoronise reference frequency. p. 6