MVS6000
2-2
MVS6000 System Level Manual/1.0/Dec-2001
2.1 MVS600x Board
The MVS6000 family consists of three boards: the MVS6000 board, the MVS6001 board and the
MVS6002 board.
The differences between the three board types are the camera connections:
· The MVS6000 board supports two analog cameras
· the MVS6001 board supports one analog and one digital camera
· the MVS6002 board supports two digital camera
For detailed information (see page 2-12).
In the following two sections, you get an overview of the main hardware blocks and you see the
layout of the MVS6000 board and the MVS6002 board.
2.1.1 Main Hardware Blocks
· 2 DSP chips: TI320C6202 - 250Mhz
· SDRAM: 32 MB, used for application software, models, images,…
· Xilinx programmable components used, for example, for the timing generators of the cameras
· PLX driver for PCI communication (which gives the board read/write access to the hard disk)
· 3 SEEPROMS: for board-specific initial settings only
· 2 independent parallel video input channels
· PCI or RS232 communication
· Digital camera support as an option